|
|
|
| P.O. Box 245, Wyoming, RI 02898 Ph: 401-539-7305 / Fax: 401-539-7861 |
|
|
SPECIALS
limited quantities available
|
|||||||||||||||||||
2 Hole Mounting Plate These new steering column supports have been needed for years. They feature a split housing and low friction bushing that is greasable. These pieces eliminate the play from the bottom of the steering column. The 2 models fit most of the models of Polaris. For best results, the lower support should be used with the WMS upper support block. The 4 hole version fits most CRC sleds, 2 hole fits XLT, 600 monoblock and Ultra.
For Yamaha Upgraded again for 2001 - Trailing Arms for Yamaha. These new lightweight trailing arms are constructed from 4130 chrome moly, heliarc-arc welded, stress relieved and heat treated. All trailing arms are fitted with HD rod ends at the rear for better operation. Urethane or Epoxy powder coating is standard on all models. Colors - white and chrome silver. Friction Fighter Bushings are fitted where applicable. Our new trailing arms are
significantly stonger and less susceptible to bending and cracking than
the factory supplied units. These do not need to be braced and modified
for heavy duty use. Sway bar mounts are included as standard.
|
||||||||||||||||||||
|
